Blade Network Technologies RACKSWITCH G8124 Guía de instalación Pagina 28

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 52
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 27
RackSwitch G8124 Installation Guide
28
Chapter 2: Installing the RackSwitch G8124 BPP-00018-01, December 2009
2. M6 screws, washers, and clip nuts are used to attach the alignment plate.
Torque the screws to approximately 30 inch-pounds (3.5 Nm).
Figure 8 Attaching the Alignment Plate
3. M6 screws, washers, and clip nuts are used to mount the switch unit into the rack.
Torque the screws to approximately 30 inch-pounds (3.5 Nm).
Figure 9 Rack-Mounting the Switch Unit
Vista de pagina 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 51 52

Comentarios a estos manuales

Sin comentarios